HiCORE-i6320VL3 - Arbor HiCORE-i6320VL3 CPU Board - Full-size Socket 370 Pentium III...
Request Quote
For Price
- Part Number:
- HiCORE-i6320VL3
- Model Number:
- HiCORE-i6320VL3
- Make:
- ARBOR
- Lead Time:
- Available
- Qty In Stock:
- Available
Arbor HiCORE-i6320VL3 CPU Board - Full-size Socket 370 Pentium III Tualatin SBC w/ Flat Panel / CRT SVGA, and 3 LAN ports (includes FEMD-LD1301 daughterboard) Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Flat Panel / CRT support
- High Drive ISA64, CTI Ready
- LAN 10/100 Mbps (optional 3 LAN)
- SCSI ULTRA160 Adaptec AIC-7892
- Socket 370 Pentium III Tualatin 1.4 GHz or Celeron up to 1.3 GHz
- Up to 512 MB SDRAM on DIMM
Specifications
- BIOS: Award BIOS with 4Mb Flash in Firmware Hub (FWH) supports PnP, APM, Multi Boot, DMI, ACPI
- Chipset: 1 x Internal 82562ET PHY 10/100 Mbps, autoswitching
- Chipset: Adaptec AIC-7892 SCSI ULTRA 160
- Chipset: Intel 815E/82815 Graphics Memory Controller with DVI and CRT support
- Chipset: Intel 82815E & 82801BA
- Connector: Onboard 68-pin male SCSI-3
- Connector: RJ-45 on bracket
- CPU: Socket 370 supports Pentium III (Tualatin) up 1.4 GHz and Celeron with FSB 133/100 MHz
- CRT: 1280x1024 @ 24bpp, 1600x1200 @ 8bpp
- Dimension (L x W): 338 x 122 mm (13.3" x 4.8")
- Display Memory: Up to 32 MB SDRAM (DVMT)
- Enhanced IDE: 2 ports and up to 4 ATAPI devices, Ultra DMA transfer rates 100 MB/sec
- Expansion: 32-bit PCI, 16-bit ISA (PICMG v1.0 passive backplane)
- Flash Disk: DiskOnChip2000 socket
- Floppy: 2 x floppy disk drives
- High Drive ISA64 bus CTI ready: 64 mA high drive buffer supports up to 20 ISA based add-on cards
- IrDA: Onboard IrDA TX/RX port (5-pin header)
- K/B & Mouse: PS/2 KB/Mouse port (2-in-1 mini DIN), onboard AT Keyboard (5-pin box header)
- L2 Cache: CPU integrated
- OEM option: Addtional 2 x Intel 82559 onboard for total of 3 x LAN, requires daughterboard with Dual RJ-45 on bracket
- Operating Temperature: 0 ~ 60°C (32 ~ 140°F)
- Parallel: SPP, EPP and ECP mode
- Power Requirement: +5 V @ 6.8 A (typical), +12 V @ 0.08 A (typical); (Pentium III 1.0 GHz at 133 FSB and 512 MB PC-133 SDRAM)
- Processor: Intel Pentium III
- Relative Humidity: Up ~ 90% @ 55°C
- Serial: External RS-232C (COM1), internal RS-232C/422/485 (COM2)
- System Memory: PC-133 SDRAM up to 512 MB on two DIMM sockets
- TMDS: Flat Panel DVI Transmitter up to 165MHz
- USB: 4 x USB v1.1 ports (2x 5-pin header)
- Watchdog Timer: 128-level timer generates RESET or NMI
- Weight: 0.6 Kg (1.32 lb)
Applications
- None Available
Aliases
- None Available