EmCORE-i411DVL2 - Arbor EmCORE-i411DVL2 CPU Board. 3.5" Embedded ZFx86 Miniboard with Flat...
Request Quote
For Price
- Part Number:
- EmCORE-i411DVL2
- Model Number:
- EmCORE-i411DVL2
- Make:
- ARBOR
- Lead Time:
- Available
- Qty In Stock:
- Available
Arbor EmCORE-i411DVL2 CPU Board. 3.5" Embedded ZFx86 Miniboard with Flat Panel Display Controller Dual Ethernet | DiskOnChip socket and CompactFlash socket (includes 32MB onboard SDRAM) Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 32 MB SDRAM soldered on board
- CompactFlash type l/II
- Dual LAN 10/100 Mbps, RTL 8139C
- Flat Panel / CRT support
- ZFx86 FailSafe embedded System on-a-chip
Specifications
- BIOS: Phoenix Embedded PC BIOS with RS-232 console redirection for headless BIOS access
- Chipset: Dual RTL8139C 10/100 Mbps, autoswitching
- Chipset: SMI SM712G4AA LynxEM4+
- Connector: 2 x 10-pin onboard headers
- CPU + Chipset: ZFx86 Failsafe 486 CPU core operating at 133, 100, 66 and 33 MHz with 32-bit 33 MHz PCI rev 2.1 compliant “Northbridge” and “Southbridge” FailSafe internal Boot ROM that allows execution of multiple instruction sets: DRAM clear, Flash erase, executable load and run, Provides permanent and fail-safe mechanism
- Dimension (L x W): 145 x 102 mm (5.7" x 4")
- Display Memory: 4 MB memory on dye
- Display Type: CRT, Flat Panel (TFT, DSTN)
- Enhanced IDE: 2 ports and up to four ATAPI devices with Ultra DMA 33 Mhz
- Expansion Interface: PC/104 (ISA)
- Flash Disk: One DiskOnChip2000 socket, CompactFlash Type I/II
- Floppy: 1 x 3½" floppy disk drive
- GPIO: 16-bit GPIO
- K/B & Mouse: AT Keyboard and PS2 Mouse
- LCD Interface: TTL 24-bit
- Operating Temperature: 0 ~ 60°C (32 ~ 140°F)
- Parallel: SPP, EPP and ECP mode
- Power Requirement: 5 V @ 1A (typical) with 32 MB DRAM and 8 MB Flash disk at 100 MHz
- Relative Humidity: Up to 90% @ 55°C
- Resolution: 1024 x 768 24bpp
- Serial: Three high speed RS-232C ports (COM1, 3, 4) and one jumper selectable RS-232C/422/485 (COM2), all provide jumper selecable +5V/+12V DC power
- System Memory: 32 MB Synchronous DRAM on board
- USB: 2 USB v.1.1 ports and Open HCL compliant
- Watchdog Timer: Embedded application Dual Watchdog Timer (WDT) with SW and HW control of the WDT event 16 bit counter primary watchdog connected to SW IRQ/NMI/SMI reset by Watch Dog Timer Input (WDI). Second 8 bit counter output connected to H/W reset line enabled by primary counter output
- Weight: 0.24 Kg (0.53 Ib)
Applications
- None Available
Aliases
- None Available